Look ma no tools! You don't need the prongs or hex key whenever you want to adjust your spring tension. Loosen the side thumb screw to adjust the HST in or out with ease. Once you're done, tighten back the side screw.  Features: CNC parts Has a through hole in the back in case the spring tension is too much, you can use a hex key or thin screw driver to help turn Black anodize to add character to your gun Package includes side thumb screw and HST adjuster

Replace your factory tank valve with our larger valve. The large knobs and handle make filling and releasing air a breeze! Features: Open and close tank with a 2.25 inch knob Drain the line with the 1.25 inch knob Dead head to test the tank's pressure 2.2 inch gauge display Tank thread 7/8-14 UNF Pair with ST0037 adapter to be able to screw on carbon fiber gun bottles.

This adapter screws into the OEM shroud. Replaces the original front cap. Features: Comes with knurled cap CNC Matte black anodize Other things to consider: Gauntlet Aluminum Air Stripper **NOT COMPATIBLE WITH THE .30 CAL GAUNTLET 2

This piece replaces the OEM plastic air stripper. This will help in the long run as the plastic ones tend to crack. It includes o-ring. Features: 6061 Aluminum Matte black anodize Other things to consider: Gauntlet 1/2 x 20 adapter Gauntlet short shroud with 1/2 x 20 adapter **NOT COMPATIBLE WITH THE .30 CAL GAUNTLET 2

This adapter replaces the factory shroud baffle and has M18x1 threads. Comes with thread protector Instructions: remove the factory shroud by grabbing onto the shroud by the front cap. When you turn the shroud counter clockwise, that should loosen the front cap. The shroud is free floating, there are no threads in it. Important thing is to remove the front cap. once shroud is off, put a few drops of red loctite onto the barrel thread. put the shroud back on now take new shroud adapter and tighten onto barrel. Let it dry for a few minutes remove thread protector on shroud adapter to screw on an airgun suppressor with M18x1 threads. This adapter does not fit on the Umarex Hammer Carbine.

Features: 6061 Aluminum 1/2 x 20 male threads Black Anodized Thread Protector compatible up to 30 caliber Will not work if your baffle looks like the one in the picture below.

UTG® ACCU-SYNC® dot sights come in a compact and subcompact size and feature a red illuminated 3 MOA dot with 8 manually adjusted brightness intensity settings to choose from. Illumination memory conveniently gets users right back to the last brightness setting used upon activation. Fully sealed, ACCU-SYNC® dot sights are IPX7 waterproof rated and constructed from matte black anodized 6061-T6 aluminum. Optimized for low power consumption and powered by a single CR2032 battery, a 30,000+ hour battery life (at middle brightness) comes standard. The mounting base uses the common mini ACOG® footprint and is configured for a lower 1/3 co-witness out of the box. Removing the included riser drops the height down to that of a low mount providing users two commonly used height profiles for different firearm applications. In addition, the base features squared recoil stops and our QR (quick release) mount, making for a quick installation and removal, reliable return to zero, and is compatible with Picatinny rails with widths that may even be out of spec. Tool-free tension adjustment is locked in place via a gear and spring-loaded locking lever interface, allowing users to set it once and forget it.

Expertly crafted for precision, the UTG Bug Buster Rifle Scope combines 3-9x magnification, a 32mm adjustable objective lens, and a Mil-dot reticle for clear and accurate long-range shots. With True Strength construction and EZ-TAP Illumination technology, this scope is durable and reliable in any environment, providing enhanced visibility and versatility for any shooting situation. Rifle Scope: Key Features- Magnification: 3-9x for versatile zooming.- Objective Lens: 32mm, adjustable for precision focus.- Tube Size: 1", standard compatibility.- Adjustment: 1/4 MOA (1/4" at 100 yards).- Reticle:** Mil-dot for accurate sighting.- Parallax Adjustment: 3 yards to infinity.- Field of View: 37.7' to 14' at 100 yards.- Eye Relief: 4.2" to 3.2" for comfort.- Exit Pupil: 10.6mm to 3.6mm.- Weight & Length: 13.9 oz., 8.50" long.- Accessories: Includes battery, sunshade, lens caps, and mounting rings.Advanced Optics:- Emerald-Coated: For 95% light transmission.- Nitrogen Filled: Fogproof, shockproof, rainproof.- EZ-TAP IE Technology: RGB and 36-color mode.- Memory System: Retains color/brightness settings.- Zero Lock Turrets: Easy adjustments.Finish:- Matte Black:** Sleek and glare-reducing.Ideal for various lighting conditions, this scope offers an illuminated reticle in multiple colors, enhancing visibility and precision in every environment.

These are snap-in adapters to go from Dovetail to Picatinny. They are low-profile, lightweight and very easy to install.  -Top slot with spring tension retraction / Expansion design to snap into picatinny/weaver base.  -Precision and repeatable alignment.  -Removable stop pin for extra secure installation

UTG PRO 30mm 2pc Medium Profile P.O.I Dovetail Rings allow for adding scopes with a 30mm tube and up to a 59mm outer objective diameter. They use a snag-free design with a smaller overall size and are constructed from steel and aircraft-grade aluminum for reduced weight while being stronger than comparable rings. The package includes a T25 Torx wrench for easy installation, and both rings use a Torx screw on the locking side plate, in addition to two Torx screws per side. To grip the dovetail rail securely, the rings use spring-loaded guide rods, and a smooth and precise fit between the scope tube and ring is the result of manufacturing precision and close attention to detail. Also, the removable threaded stop pin provides stability against recoil. UTG PRO 30mm 2pc Medium Profile P.O.I Dovetail Rings Durable 6061-T6 aircraft-grade aluminum and steel construction Matte black finish Fits 30mm tubes 33mm center height fits up to 59mm outer objective diameter Torx screw locking side plate with spring-loaded guide rods Removable threaded recoil stop pin Snag-free design Designed and made in the USA Medium ring saddle height: 15mm High ring saddle height: 22mm Please note: These rings will not fit FX Airguns dovetails appropriately. 

Designed and manufactured in the U.S.A., these scope rings feature precision machining, tight tolerances and superior material strength providing a seamless ring-to-scope integration. The low-profile locking side plate is controlled by dual spring-loaded guide rods that offer the most precise fitting to the rail. The Torx screws lock the side plate and ensure a repeatable zero. These rings are rated for use on up to a .50 BMG. UTG medium-profile Pro Picatinny scope rings are designed and made in the U.S.A. The POI rings are 30 mm at center height and fit optics ranging in objective diameter up to 59 mm.The innovative precision optics are machined for a precise inner ring surface that achieves seamless ring-to-scope interaction. And, to ensure secure and repeatable zero hold, the low-profile and flush-fitting locking side plate is controlled by dual spring-loaded guide rods that interface with the rail via torx screw locking. To eliminate the possibility of movement from recoil vibrations, the integrated recoil stop interfaces with the Picatinny slot with complete surface contact.What does all of this engineering mean for you? Worry-free shooting, no re-zeroing, and quality hardware for your scope. UTG Pro (Precision Optics Interface) Made in the USA 30mm Picatinny scope rings Medium profile Precision machined, aluminum and steel construction finished with hard coat anodizing Integral squared recoil stop Low-profile torx locking slide plate with dial spring-loaded guide rods Live fire recoil repetition tested Inner ring surface is precision machined 30 mm diameter 30 mm center height 22 mm width Includes: 2 ring pieces, each equipped with 4 torx screws Medium ring saddle height: 15mm High ring saddle height: 22mm

Precision Machined from Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish. Friendly Hex Screws with Retention Features and Full Length Locking Plate to Guarantee Easy Installation and Secure Fit. Fits All Picatinny/Weaver Rails.

Precision Machined from Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish. Friendly Hex Screws with Retention Features and Full Length Locking Plate to Guarantee Easy Installation and Secure Fit. Fits All Picatinny/Weaver Rails.

Experience the Ultimate Shooting Upgrade with the Western Airguns Sidewinder Adapter by DonnyFL! Elevate your airgun game to new heights with our innovative Sidewinder Adapter, designed to give you the perfect fusion of performance, compatibility, and durability. Experience unmatched shooting prowess as you pair your favorite silencers or moderators with high-powered air rifles like never before. Product Features: Exclusive Pre-Production Offer: Be the first to test out this cutting-edge technology with our special pre-production, non-anodized version of the Sidewinder adapter. Unparalleled Durability: Crafted from high-quality 6061 aluminum, ensuring long-lasting performance and reliability. Wide Compatibility: Designed for .22 to .30 caliber airguns, making it a versatile and indispensable addition to your shooting arsenal. Exceptional Performance: Experience improved accuracy and noise reduction with seamless integration of your favorite silencers or moderators. Thread Size: 1/2 x 20. Note: Not compatible with the Rattler model. Don't miss this limited-time opportunity to upgrade your airgun performance with the Western Airguns Sidewinder Adapter from DonnyFL. Say goodbye to mediocre shooting and hello to the future of airgun excellence. Order now and experience the difference!

Customize the size of your Yokozuna or replace sections of your unit with these individual parts. Please note I would not add more than 2 extra baffles on top of the factory units. If you plan to do so, I would recommend going one caliber size up. *The products on DonnyFL are INTENDED for use on airguns only.  It is a violation of Federal law to use this product in a manner inconsistent with what it was intended for.for.

Customize the size of your Yokozuna or replace sections of your unit with these individual parts. Please note I would not add more than 2 extra baffles on top of the factory units. If you plan to do so, I would recommend going one caliber size up. *The products on DonnyFL are INTENDED for use on airguns only.  It is a violation of Federal law to use this product in a manner inconsistent with what it was intended for.for.