The Saber Tactical ARCA Rail Barricade Stop – Your Shortcut to Precision and Performance! Unlock the full potential of your ARCA rail-equipped gun with the Saber Tactical Barricade Stop – where innovation meets simplicity for the ultimate shooting experience. Swift Installation, Unmatched Versatility: Our Barricade Stop effortlessly glides onto your gun's ARCA rail, ensuring a hassle-free setup. No complicated installations, no time wasted. Just slide it on, and you're ready to dominate the shooting range. Precision at Your Fingertips: With a mere twist of the ergonomic Delrin handle, you gain full control over your shooting position. Tighten or loosen with ease to achieve the perfect balance and stability, adapting swiftly to changing shooting scenarios. Built for Excellence: Crafted from the finest 6061 aluminum, this Barricade Stop is not only lightweight but also rugged, ensuring it can withstand the harshest conditions. The Delrin handle provides a comfortable grip, giving you confidence and control with every shot. The Saber Tactical Advantage: Join the ranks of elite shooters who trust Saber Tactical for superior shooting accessories. We're dedicated to helping you achieve your shooting goals with the finest equipment available.

This is an easy to install cheek riser for the FX Impact. It reuses the factory cheek rest and makes it more comfortable for the shooter, a simple yet effective tool. Features 6061 Aluminum Matte Anodized Stainless Steel screws

With this bag rider, you can easily adjust the height of your gun simply by sliding a shooting bag forward or back. It's that simple to use and also simple to install. This item has proven its effectiveness in competition. If you plan on using the factory Fx grip with the bag rider, this will require an additional purchase of the FX Impact Bag Rider Adapter ST0018 ***For the Maverick you will have to bend and straighten in order to get the bag rider to fit properly***  Note: Bag Rider is not compatible with Saber Tactical Vertical Grip  How to install with Hogue grip How to install with FX grip

Do you need to extend the picatinny rail further on the Impact? Then this is the perfect add-on. Very sturdy and hardly any flex. It comes with an extended dust cap for your convenience.

The Arca Swiss rail allows for easy and fast adjustments. This 3 in 1 rail has a screw hole for your common camera tripod adapter. It has the Arca Swiss rail which allows you to easily slide your gun back and forth. If you have a picatinny bipod, there's also a picatinny rail in the front. It comes with an extended dust cap for your convenience. Overall, it's a well versed rail for the FX Impact.

The engineers at Saber Tactical listened to the end users & incorporated everything into this design. We made this one for bench shooters & hunters. One of our priorities was to make it easy to attach to the gun & make adjustments without tools. You'll be amazed at how easy it is to adjust the buttstock up and down, forward and back, and the angle of the shoulder rest. The silicone padding makes it one of the most comfortable buttstocks on the market. A mono-pod attachment is available as an optional attachment for maximum comfort.

If you're uneasy about drilling into your factory gun stock, this 60mm bottle clamp will easily attach to your 60mm carbon fiber or aluminum bottles. It has rubber pads on the inside to prevent any marring to your bottle.  This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories. Features: 6061 T6 aluminum Matte black anodize Compatible with: FX Carbon Fiber & Steel BottlesRAW (HM1000X, etc)Daystate (Redwolf, Airwolf, etc)Brocock (Commander, Bantam, etc)  

If you're uneasy about drilling into your factory gun stock, this 34mm tube clamp will easily attach to your 34mm air reservoir. It has rubber pads on the inside to prevent any marring to your bottle. This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories. Features: 6061 T6 aluminum Matte black anodize  Compatible with: FX Wildcat FX Dreamlime "Tube" FX Streamline Taipan Veteran Benjamin Marauder

If you've upgraded to the new FX grip and need to attached the bag rider you already have to it, you'll need this adapter. Please watch install video below. All new bag rider purchases will include this adapter. Features: 6061 T6 Aluminum Black anodized

This kit comes in handy when you have to travel with your airguns. TSA requires that the bottles are empty and may ask you to disassemble it to show that it is empty. It has a knurled screw that screws into the bottle and releases the air. Once the tank is empty, attach the red bottle clamp onto the bottle and use the custom wrench to slowly unscrew and release any remaining air. The red bottle clamp is lined with silicone pads, it does not mark your bottle.  

Similar to the first Arca Rail, however, this one has T slots on both sides allowing you to attach shooting accessories such as flashlight and laser. Edges are smooth and makes it very comfortable to shoot offhand. It includes an extended dust fill cap. Features: Aluminum 6061 T6 Hard black anodize Arca Swiss Rail underneath with Picatinny at the end Also has 1/4 x 20 threads for common camera tripod attachment

This compact arca swiss rail is great for the FX Impact with the short 300cc bottle. Makes the gun very comfortable to shoot off hand and allows you to attach your favorite shooting accessories such as a flashlight or laser pointer. Features: Aluminum 6061 T6 Hard black anodized Arca swiss rail with picatinny at the end 1/4 x 20 threads for common photography tripod adapter

Our field testers were very excited to get it and raved at how much comfort and versatility it adds to an already spectacular rifle. Not only does it add a WOW factor to the already loved gun, but it also allows the shooter to make it the ultimate platform for precision shooting. It elevates the FX Crown to a whole other level, just ask the competitors who've won with this setup! ***THE NEW VERSION HAS A GAP THAT WILL NOT ALLOW FOR THE MAGNET ON THE FOLDING STOCK TO ENGAGE DUE TO THE DESIGN OF THE M-LOK RAIL***  Features: Arca Swiss rail with a short Picatinny rail in front. Arca Swiss rail with M Lok mounts. Foldable stock magnetically secured. Built-in detachable bag rider. Adjustable cheek rest. Our very popular adjustable buttstock. QD sling mount holes are integrated into the stock on both sides. Weighs about 6lbs.  How to install

This adapter allows you to connect two air bottles to the gun, yes, TWO! That means you get double the play time. Works with the larger manometer. Now compatible with FX Impact M3 Features: 6061 T6 aluminum body and stainless steel tank nipples.

This extended quick disconnect (QD) makes it easy for those guns with hard to reach fill nipples. You'll wonder how you did without it! A must have for FX Impacts. Features:1/8 BSP male threadsRelease collar close to 1.20 inches longComes with sealed washer

If you already have the Saber Tactical buttstock, or you plan to get one, this mono-pod is a great addition to it for bench competition. It's very rigid and sturdy, yet making horizontal and vertical adjustments is butter smooth! Includes adapter to attach to buttstock. Features: Stainless Steel Precision lead screw for smooth micro adjustments Other metals are aluminum 6061 T6 Rubber bottom for extra grip No need to loosen knobs for adjusting Detach and attach mono-pod to adapter by sliding the mono-pod in.  Strong magnets help keep it secure Ball joint near the base allows you to cant  Feed back from our 2021 RMAC Champ!

If your gun already has the Saber Tactical buttstock, or you plan to get one, this mono-pod is a great addition for field use. Even if the the shooting surface is not perfectly fat, the ball joint can easily adjust to it. Features: Stainless Steel  Precision lead screw for smooth micro adjustments Other metals are aluminum 6061 T6 Rubber bottom for extra grip No need to loosen knobs to make adjustments Includes attached adapter for the buttstock Detach and attach mono-pod to adapter by sliding the mono-pod in.  Strong magnets help keep it secure Ball joint near the base allowing you to cant 

If you have multiple buttstocks and would like to share the mono-pod, just attach this adapter to the extra buttstock. Easily and quickly swap the monopod between them. Comes with adapter and screws to attach to the buttstock.