Airforce Adapters

  Made of steel 1/2 x 20 UNF threads compatible with .22 and .25 caliber Comes with black anodized Aluminum thread protector Tight fit and has two set screws (M4) to help secure it onto the barrel Uses 2mm hex keys for set screws

  Add a moderator to this adapter to make the Condor SS super quiet.  Features:  Compatible with .177 to .25 Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip Comes with Oring

Please note, this will not fit the Escape Ultra Light version. Contact me for custom adapter. Finally an answer to the Airforce Texan line up.   Made of steel 1/2 x 20 UNF threads compatible with .22 and .25 caliber Compatible with other 16mm barrel as well. Comes with black anodized Aluminum thread protector Tight fit and has two set screws (M4) to help secure it onto the barrel Uses 2mm hex keys for set screws

Add a moderator to this adapter to make the Talon SS and TalonP super quiet.  Features:  Compatible with .177 to .25 Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip Comes with Oring

  If your TalonP Carbine came with a factory moderator and you need it to be more quiet, install this adapter. It'll then allow you to screw on a suppressor that is threaded 1/2 x 20. Features:  Compatible with .177 to .25 Made by CNC for accuracy Material is 6061 T6 Aluminum Black matte anodize Diamond pattern knurling for easy grip

  Note: Please measure the outer diameter of your barrel with a caliper before ordering and compare it with the size chart below. There may be slight barrel-to-barrel variations from the spec due to the thickness of the protective coating of your barrel. If your barrel is bigger than spec, contact us about a custom adapter. Features: Made of steel  M18x1 threads, compatible with big-bore Ronin, Emperor and Great Kami moderators with M18x1 endcaps Comes with a black anodized Aluminum thread protector Adapters are meant to be a tight fit and have two set screws (M4) to help secure to the barrel In some cases, proper installation may require sanding inside the adapter Uses 2mm hex keys for set screws I would recommend putting a thin film of blue Loctite on the barrel, then sliding it into the adapter. Let the Loctite set overnight before shooting. The following are the inner diameter for my adapters: .257 = Use Condor adapter here There are two sizes for .308/357 .308/357 = 16mm or .625 inches "A34" .308/.357 = 17mm or .67inches "A95" .457 = .707 to .71 inches There are two sizes for .50/.510 .50 =  18.83 mm .50 = 19.1 mm For the Tex-Rex, we do not recommend a slide-on adapter. Having your barrel threaded in M18x1 is our recommendation.  

This adapter screws directly to the end of the factory Texan LSS shroud.   It has M18x1 male threads to pair with my big bore suppressors. Add an Emperor or Ronin to tame the beast!  Features: 6061 Aluminum Matte black anodize knurled thread protector