DONNYFL AIRGUN ADAPTERS

  Features: Compatible with .45 and .50 caliber Made of steel  M18x1 threads compatible with Emperor with M18x1 endcap Comes with black anodized Aluminum thread protector Adapters are tight fit and has four set screws (M4) to help secure it onto the barrel Uses 2mm hex keys for set screws NOTE: We've seen some variance in the OD of barrels recently, please DO NOT ORDER ONLINE. Instead email us with a note of your barrel's EXACT OD so it can be custom made to fit your barrel.

  If you have a Hatsan Bully .25/.30- based on customer's feedback, I would go with the Emperor.  *We have not had any success with customers using a suppressor on Hatsan's line up of semi auto guns. It causes the gun to not index properly. Features: Matte black Anodized CNC Includes knurled thread protector Compatible up to .30 Compatible with the following guns: Hatsan GladiusHatsan Flash Wood QEHatsan AirMaxHatsan Bullboss QEHatsan BT65 QEHatsan Nova QEHatsan AT44-10 QEHatsan Hercules QEHatsan Flashpup QEHatsan AT P1Hatsan Flash QE

Features: Matte black Anodized CNC Includes knurled thread protector Compatible for the .357 and .457 model The new Factor BP in .357 cal has M14x1.25 threads on the QE system, so for that air rifle you need a moderator with an M14x1.25 endcap, not an adapter.  

  Features:  Made by CNC for accuracy Material is 6061 T6 Aluminum Grey anodize Diamond pattern knurling for easy grip Compatible with .22 and .25 calibers

  Features:  *Warning, suppressors do not work well on Hatsan's line up of semi-auto guns. It will disrupt the magazine index and will not index properly. Use this adapter only if you plan to single load. Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

This adapter allows you to add a 1/2 x 20 moderator or muzzle brake to your fun little pistol. Features: 6061 T6 Aluminum Black Anodize Knurled thread protector

  Does not work on first gen Hubens Features Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

Features:  Made by CNC for accuracy Material is 6061 T6 Aluminum Matte black anodize Diamond pattern knurling for easy grip Compatible with .357 Ronin and .357 Emperor

Elevate your shooting experience with the DonnyFL JTS Aircuda and Aircuda MAX Adapter. Expertly crafted to let you seamlessly attach a DonnyFL Moderator to your rifle, this adapter ensures you can shoot with enhanced precision and reduced noise. Key Features: Compatibility: Perfect fit for JTS Aircuda and Aircuda MAX rifles. Suitable for .22, .25, .30 caliber variants. Premium Material: Made with high-grade 6061 aluminum, ensuring durability and a lightweight feel. Because this adapter was made to fit both the Standard and Max versions of the AirCuda, and because of the variations between individual rifles, you may find that one or two threads remain exposed when you snug the adapter in place. This is normal, and will not effect the performance of the rifle. In fact, our testing has revealed that a longer or heavier moderator can be used with less risk of clipping as compared to the endcap-only style adapter. It was necessary to design in this flexibility to overcome the challenges of this airgun's shroud design so that moderators can be used.

  Features: 6061 Aluminum 1/2 x 20 male threads Black Anodized Thread Protector compatible up to 30 caliber

  Features:  Made by CNC for accuracy Material is 6061 T6 Aluminum Matte black anodize Diamond pattern knurling for easy grip Compatible with .177, .22 and .25 calibers

Please Read*  If you remove your factory moderator and the threads look like exhibit B, select the .30 specific adapter A110. To pick the correct adapter, you will need to measure the length of your carbon fiber shroud. If your shroud measures 13 or 17 inches, you'll need A57. If your shroud measures 11.5 inches and you eventually want to use a longer bottle(580 cc) you'll need A72 If  your shroud is 11.5 inches long and you have no intentions of adding a longer bottle then go with A73 Easy to install 1/2 x 20 adapter for the LCS SK19. Convert your shroud to accept any 1/2 x 20 suppressor of your choice. I would highly recommend a Ronin one size up from what the gun's caliber is. Still very effective but more importantly reduces the chance of pellet clipping, especially during rapid fire. *Make sure to use a suppressor one caliber size up. Works really well and reduces the chance of pellet clipping.   CNC Matte Black Anodize Compatible with .22/25 caliber

Right handed threads to convert barrels with M14x1 to 1/2 x 20. Features: 16.05mm OD, 15.20mm deep on female side Black anodized and knurled throughout on the outside.

This adapter is about 22mm OD x 38.30mm Length. It converts barrel threads from M14x1.25 to 1/2 x 20.  Does not come with a thread protector.  Features: 6061 T6 Aluminum Silver (no anodize)

This adapter will allow you to screw on a 1/2 x 20 airgun suppressor.   Features: Knurled cap CNC Matte black anodize *Make sure to use a suppressor one caliber size up. Works really well and reduces the chance of pellet clipping.

These adapters are for the RAW HM 1000x shrouds that are 2inches in diameter. Not compatible with the offset ones.  There are two types of shrouds out there, remove the factory short screw on suppressor.  If your shroud looks like the one in the picture below, select . NOTE: This adapter has M18x1 threads, so you may also need an M18x1 endcap for your moderator.   If it looks like the shroud below then select A90. This adapter does not have a thread protector. 

If your Priest shroud sits behind the air bottle and you would like to use a larger suppressor, this extender will allow you to do so. Features: 6061 T6 aluminum Knurled cap Matte black anodize 

Sam Yangs are known to output some crazy power. This adapter with M18x1 threads will allow you to screw on the Emperor v3. You might have need the Extender as well if Silence is a Priority!

  Features:  Made by CNC for accuracy Material is 6061 T6 Aluminum Matte black anodize Diamond pattern knurling for easy grip Compatible up to .357 to .457 cal Seneca .357 uses 5/8x18 Please note* Sam Yang has two different types of barrel threads, M16x1.5 and 5/8x18. Best way to determine which threads you have is to go to a hardware store and pickup one of the bolts. If the bolt does not screw on then it must be the other size. If your barrel is too close to the fill probe you will need to get the extended adapter version. I currently do not have the short version of the 5/8x18.  

Features:    Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip