AIRGUN ADAPTERS

For custom adapters, please contact us in-house through email. We have an incredible machinist with years of experience, he's one of us in the airgun community.  PRICE FOR CUSTOM ADAPTERS ARE $50-$70 The price varies depending on the size and quantity of material.  MAKE SURE TO DOUBLE CHECK YOUR MEASUREMENTS!!!  Once the measurements are received by us and we make the product, as it leaves our possession the job is done. We do not offer warrantee on custom adapters so in the case that you receive your adapter and it doesn't fit due to a miscalculation on the customers end, it does not warrant a retry.   CUSTOM ADAPTERS WILL NOT BE ANODIZED!! IT WILL BE SENT AS BARE ALUMINUM!! Email: Izzy@donnyfl.com with specifications.    

This adapter is compatible with the .357/.45/50 big bore SIDE LEVER AEA Challenger as well as the .357/.45/.50 AEA HP SS Max.  Features: M18x1 male threads 6061 T6 Aluminum Anodized Knurled thread protector

Features: Any gun that needs a double sided male adapter One side has knurled cap Has through hole in the threads for easy tightening or loosening CNC Matte Black Anodize .79 inches / 20 mm OD Great for AirArms 

Have an airgun that does not have a shroud and would like to be able to add an airgun moderator? These slide-on adapters work on airguns with barrel sizes 10mm, 11mm, 12mm, 14mm, 15mm, and 16mm. Features:  Compatible with .177 to .25 Made by CNC for accuracy The material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip It comes with M4 set screws It uses 2mm Allen keys the A56 version is made of steel instead of aluminum 

Please note if your gun is the side lever version, you'll need this adapter instead https://donnyfl.com/products/45-50-aea-challenger-345-aea-hp-ss-max?_pos=1&_sid=a77757bc5&_ss=r Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Comes with knurled thread protector For .30 caliber measure the OD of the threaded part of the front cap. It should be close to 28mm. May need to heat up the front cap with a heat gun or mini torch to loosen the thread locker.

This adapter converts the factory barrel threads from M14x1 to 1/2 x 20. It is also designed to center the barrel within the shroud. Features: 6061 T6 Aluminum Comes with knurled thread protector Compatible up to .30 caliber

This end cap is for your Ronin or Emperor to screw directly onto the AEA Challenger pro shroud. It has a recess that helps center the barrel inside the shroud.  Features: 6061 T6 Aluminum compatible with all Challenger Pro barrels

Note:* This is for the AEA Element that does not have a power wheel. If your gun has a power wheel, get this adapter instead A93 This adapter fits factory carbon fiber shroud allowing you to screw on an airgun suppressor with 1/2 x 20 threads. Features: 6061 Aluminum T6 Black Anodized Knurled thread protector  

*Note: Will only fit on the newer Element with the power wheel. If your gun does not have the power wheel, get this adapter instead- A85 This adapter fits factory carbon fiber shroud allowing you to screw on an airgun suppressor with 1/2 x 20 threads. Features: 6061 Aluminum T6 Black Anodized Knurled thread protector

Works on AEA HP models up to .30 caliber. Includes: HP SS, HP SS Plus, HP SS max Features: 6061 Aluminum 1/2 x 20 male threads Black Anodized

This adapter is 2 inches long and clears the factory air tube allowing you to put a Great Kami or Emperor with M18x1 threads.  Features: Aluminum 6061 T6 Not anodized

You may need to heat up the front cap to loosen the epoxy. Then unscrew from gun.  

This adapter is for Zeus barrels that sits behind the air tube. This extends it two inches allowing you to screw on a suppressor.  Features: Made of harden steel  M23x1 threads  

Made of steel 1/2 x 20 UNF threads compatible with .22 and .25 caliber Comes with black anodized Aluminum thread protector Tight fit and has two set screws (M4) to help secure it onto the barrel Uses 2mm hex keys for set screws

Add a moderator to this adapter to make the Condor SS super quiet.  Features:  Compatible with .177 to .25 Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip Comes with Oring

Please note, this will not fit the Escape Ultra Light version. Contact me for custom adapter. Finally an answer to the Airforce Texan line up. Made of steel 1/2 x 20 UNF threads compatible with .22 and .25 caliber Compatible with other 16mm barrel as well. Comes with black anodized Aluminum thread protector Tight fit and has two set screws (M4) to help secure it onto the barrel Uses 2mm hex keys for set screws

Add a moderator to this adapter to make the Talon SS and TalonP super quiet.  Features:  Compatible with .177 to .25 Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip Comes with Oring

Note: Please measure your barrels outer diameter before ordering. Compare with the sizes below. There maybe a change in their barrel anodizing which is causing the OD to be a little larger. Features: Made of steel  M18x1 threads compatible with .357 Ronin or Emperor with M18x1 endcap Comes with black anodized Aluminum thread protector Adapters are tight fit and have two set screws (M4) to help secure to the barrel Very tight fit, may require some sanding inside the adapter Uses 2mm hex keys for set screws I would recommend putting a thin film of blue loctite on the barrel then slide on the adapter. Let it set overnight. The following are the inner diameter for my adapters: .257 = Use Condor adapter here .308/357 = 16mm or .625 inches "A34" .308/.357 = 17mm or .67inches "A95" .457 = .707 to .71 inches Two sizes for .50 (please use a caliper and measure your barrel's outer diameter) .50 =  18.83 mm .50 = 19.1 mm  

This adapter screws directly to the end of the factory Texan LSS shroud. It has M18x1 male threads to pair with my big bore suppressors. Add an Emperor or Ronin to tame the beast!  Features: 6061 Aluminum Matte black anodize knurled thread protector