Airgun Moderator and Suppressor Adapters

DonnyFL has a solution for most rifles that are not factory-built to support our airgun moderators and suppressors. We have a wide range of muzzle adapters to suit your need to quiet down your air rifle allowing you to attach a DonnyFL moderator so that you can enjoy the convenience of perfecting your shot right in the comfort of your backyard. All without alarming the neighbors.

Hatsan Sortie 1/2 x 20 Adapter A51 $40.00

Features: *Warning, suppressors do not work well on Hatsan's line up of semi-auto guns. It will disrupt the magazine index and will not index properly. Use this adapter only if you plan to single load. Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

Huben GK1 Pistol Adapter A116 $35.00

This adapter allows you to add a 1/2 x 20 moderator or muzzle brake to your fun little pistol. Features: 6061 T6 Aluminum Black Anodize Knurled thread protector

Huben K1 1/2 x 20 Adapter A9 $40.00

Does not work on first gen Hubens Features Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

JKHan Noblesse .357 M18x1 Adapter A28 $45.00

Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Matte black anodize Diamond pattern knurling for easy grip Compatible with .357 Ronin and .357 Emperor

Kalibrgun Argus 1/2 x 20 Adapter A80 $40.00

Features: 6061 Aluminum 1/2 x 20 male threads Black Anodized Thread Protector compatible up to 30 caliber

LCS SK19 1/2 x 20 Adapter $40.00

Please Read* If you remove your factory moderator and the threads look like exhibit B, select the .30 specific adapter A110. To pick the correct adapter, you will need to measure the length of your carbon fiber shroud. If your shroud measures 13 or 17 inches, you'll need A57. If your shroud measures 11.5 inches and you eventually want to use a longer bottle(580 cc) you'll need A72 If your shroud is 11.5 inches long and you have no intentions of adding a longer bottle then go with A73 Easy to install 1/2 x 20 adapter for the LCS SK19. Convert your shroud to accept any 1/2 x 20 suppressor of your choice. I would highly recommend a Ronin one size up from what the gun's caliber is. Still very effective but more importantly reduces the chance of pellet clipping, especially during rapid fire. *Make sure to use a suppressor one caliber size up. Works really well and reduces the chance of pellet clipping. CNC Matte Black Anodize Compatible with .22/25 caliber

M14x1 to 1/2 x 20 Adapter A89 $35.00

Right handed threads to convert barrels with M14x1 to 1/2 x 20. Features: 16.05mm OD, 15.20mm deep on female side Black anodized and knurled throughout on the outside.

M14x1.25 To 1/2 x 20 Barrel Adapter A98 $25.00

This adapter is about 22mm OD x 38.30mm Length. It converts barrel threads from M14x1.25 to 1/2 x 20. Does not come with a thread protector. Features: 6061 T6 Aluminum Silver (no anodize)

Nova Vista Liberty/Seneca Aspen 1/2 x 20 A50 $40.00

This adapter will allow you to screw on a 1/2 x 20 airgun suppressor. Features: Knurled cap CNC Matte black anodize *Make sure to use a suppressor one caliber size up. Works really well and reduces the chance of pellet clipping.

RAW HM 1000x Adapter A90 $35.00

These adapters are for the RAW HM 1000x shrouds that are 2inches in diameter. Not compatible with the offset ones. There are two types of shrouds out there, remove the factory short screw on suppressor. If your shroud looks like the one in the picture below, select . NOTE: This adapter has M18x1 threads, so you may also need an M18x1 endcap for your moderator. If it looks like the shroud below then select A90. This adapter does not have a thread protector.

RTI Priest 2 Shroud Extender A66 $35.00

If your Priest shroud sits behind the air bottle and you would like to use a larger suppressor, this extender will allow you to do so. Features: 6061 T6 aluminum Knurled cap Matte black anodize

Sam Yang .50 cal Dragon Claw A47 $50.00

Sam Yangs are known to output some crazy power. This adapter with M18x1 threads will allow you to screw on the Emperor v3. You might have need the Extender as well if Silence is a Priority!

Sam Yang / Seneca Recluse Big Bore M18x1 Adapter $45.00

Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Matte black anodize Diamond pattern knurling for easy grip Compatible up to .357 to .457 cal Seneca .357 uses 5/8x18 Please note* Sam Yang has two different types of barrel threads, M16x1.5 and 5/8x18. Best way to determine which threads you have is to go to a hardware store and pickup one of the bolts. If the bolt does not screw on then it must be the other size. If your barrel is too close to the fill probe you will need to get the extended adapter version. I currently do not have the short version of the 5/8x18.

Seneca Eagle Claw 1/2 x 20 Adapter A58 $40.00

Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

SIG MCX VIRTUS 1/2X20 Adapter from $35.00

Note: Remove the factory thread adapter and measure for the proper thread size. (If the thread size is smaller than 9.6 mm in diameter you will need the version 1.5 adapter) You have to remove the factory threads first. The factory thread has two flat sides where they can use a wrench to turn it counterclockwise to remove. Then add on the DonnyFL adapter. Features: Compatible with .177 and .22 6061 Aluminum T6 1/2 x 20 male threads

SIG MPX 1/2 x 20 Adapter A52 $35.00

Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

Skout Epoch Adapter 1/2 x 20 A108 $40.00

If you decide not to use the factory Skout moderator, use this adapter to allow you to screw on a different moderator with 1/2 x 20 threads. This will also work with the Skout Evo. Features: 6061 Aluminum Black anodize Knurled thread protector Compatible up to .30 caliber

Slide On Adapter with 1/2 x 20 UNF $45.00

Upgrade Your Airgun: Add a moderator to your airgun effortlessly with the DonnyFL Slide-On Adapter. Perfect for airguns without a shroud, this adapter enables you to attach your favorite moderator and enjoy quieter shooting. Key Features: Wide Compatibility: Fits airguns with barrel sizes 10mm, 11mm, 12mm, 14mm, 15mm, and 16mm. Caliber Range: Suitable for .177 to .25 caliber airguns. Precision Machined: CNC-made from 6061 T6 Aluminum for accuracy and durability (A56 version is made of steel). Secure Fit: Diamond pattern knurling for easy grip and installation. Includes M4 Set Screws: Ensures a tight and secure connection. Easy Installation: Uses standard 2mm Allen keys. Sleek Finish: Black anodized for a durable and attractive appearance. Expand Your Airgun's Capabilities: Enhance your shooting experience with reduced noise and improved accuracy. Order your Slide-On Adapter today from DonnyFL!

Sumatra 2500/Diana Chaser 1/2 x 20 Adapter A25 $40.00

Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Matte black anodize Diamond pattern knurling for easy grip Compatible with .22, .25 and .30 calibers

Taipan Mutant Shroud Adapter 1/2 x 20 A18 $50.00

This adapter will screw into the Mutant OEM shroud. Has 1/2 x 20 UNF male threads that allows you to screw on any 1/2 x 20 female threaded LDCs. Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Cap with diamond pattern knurling for easy grip

CATEGORIES AIRGUNS AMMO ACCESSORIES MODERATORS ADAPTERS MERCHANDISE CONTACT HELPFUL RESOURCES

NAVIGATION ABOUT US PRIVACY POLICY SHIPPING & RETURNS TERMS OF SERVICE DONNYFL AIRGUNNER FIELD NOTES DONNYFL SITEMAP SALES

VISIT OUR SOCIALS

Find anything you need

Airgun Moderator and Suppressor Adapters