All products
ACCESSORIES
ACCU-TAC BIPODS
AEA AIR RIFLES
AIR VENTURI AIRGUNS
AIRFORCE AIRGUNS
AIRGUN ADAPTERS
AIRGUN AMMO
AIRGUN MODERATORS
AIRGUN TOOLS
AIRGUNS
APPAREL
COMPRESSORS
CUSTOM MACHINED PARTS
FEATURED PRODUCTS
FX AIRGUNS
KARMA AIRGUNS
LCS AIR ARMS
MERCHANDISE
NIKSAN DEFENCE COMPANY
RAW [RAPID AIR WORX]
SABER TACTICAL
SCOPES
Ataman M2R .357 M18x1 Adapter A27
$40.50
$45.00
Features:
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Matte black anodize
Diamond pattern knurling for easy grip
Compatible with .357 model
Ataman M2R / M2 Compact 1/2 x 20 Adapter A11
$36.00
$40.00
Features:
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Matte black anodize
Diamond pattern knurling for easy grip
Compatible with .22 and .25 calibers
Beeman Underlever 1357 | 1358 A86
$40.50
$45.00
This adapter replaces the factory baffle allowing you to screw on a 1/2 x 20 airgun suppressor. You will need to remove the factory o'ring and put it on the new adapter.
Features:
6061 aluminum T6
Black anodized
Knurled thread protector
Benjamin .357 Bulldog M18x1 Adapter A41
$40.50
$45.00
This design goes back to the barrel and slides over the barrel bushing. This will keep the barrel aligned with the adapter's exit hole. Please note that the barrel bushing is not included. Factory gun already includes the bushing.
The .357 Benjamin Bulldog is becoming popular for big game hunting. Add this adapter and pair it up with a .357 Ronin or .357 Emperor to make it the ultimate hunting airgun.
I would recommend going with minimum the .357 Ronin for this gun. The .357 FX suppressor is not enough to quiet this gun down.
IF you use an Emperor with this gun, do not add the extender. Too much weight added applied to the adapter and may cause inaccuracies.
Made by CNC for accuracy
Very easy to install. Remove the top and bottom screw securing the front cap and swap it out for this adapter. Screw the two screws back in and you're done. No need to remove the shroud.
Matte Black anodize
Knurled thread protector
When putting this on, press the adapter into the shroud as you tighten the two screws. This will ensure the adapter is flush with the shroud.
Benjamin Akela/Kratos 1/2 x 20 Adapter A8
$36.00
$40.00
*Note: For the Akela, remove one of the factory baffles in order for the adapter to fit flush.
Features:
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Matte black anodize
Diamond pattern knurling for easy grip
Compatible with .177, .22 and .25 calibers
Benjamin Discovery/Maximus Adapter A20
$36.00
$40.00
Features:
This adapter has a 1/2 x 20 adapter at the end
Has two holes on top like OEM so you can use original screws and front site.
Overall length from one end to the other is 3.12 inches
has groove underneath just like OEM for ease of removing fill cap
CNC
Matte Black Anodize
Match this up with a .22 Tatsu and you have a nice quiet gun.
Benjamin Marauder Pistol (Prod) 1/2 x 20 Adapter A17
$36.00
$40.00
Want to make your Prod quieter? You'll need this 1/2 x 20 adapter, it will screw into the OEM shroud. The threads that screws into the shroud is 11/16 - 24.
The Sumo 1/2 x 20 is my favorite suppressor for this gun. However, in order to fill this gun with the Sumo, you'll have to remove the suppressor. An alternative is to go with either the Tanto or KOI with cone rear cap.
Features:
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Black anodize
Diamond pattern knurling for easy grip
Benjamin Marauder Pistol (PROD) Extended Adapter A78
$40.50
$45.00
This adapter extends the shroud 1.5 inches or about 38.1mm. Pair it up with a .22-25 Tanto 1/2 x 20 Bolt #S69 and this pistol will be very quiet. No need to remove the suppressor to fill the gun.
Features:
6061 Aluminum
Black anodized
Comes with knurled thread protector
Benjamin Marauder(Mrod)/Fortitude/Armada 1/2 x 20 Adapter A7
$36.00
$40.00
Marauders are great entry level PCP guns. There are lots of mods you can do to make them more powerful. More power means a louder gun. To make it backyard friendly, make sure to grab this adapter to allow you to screw on an aftermarket LDC. Threaded end that goes into the OEM shroud is 13/16 - 28.
Features:
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Black anodize
Diamond pattern knurling for easy grip
Bottle Degasser Kit ST0020
$58.50
$65.00
This kit comes in handy when you have to travel with your airguns. TSA requires that the bottles are empty and may ask you to disassemble it to show that it is empty.
It has a knurled screw that screws into the bottle and releases the air. Once the tank is empty, attach the red bottle clamp onto the bottle and use the custom wrench to slowly unscrew and release any remaining air. The red bottle clamp is lined with silicone pads, it does not mark your bottle.
Brocock Compatto 1/2 x 20 Adapter A4
$36.00
$40.00
Want to make your Compatto quieter? You'll need this 1/2 x 20 adapter that will screw into the OEM shroud. The threads that screws into the shroud is 11/16 - 24.
Features:
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Black anodize
Diamond pattern knurling for easy grip
Bushbuck .45 M18x1 Adapter A48
$70.00
The original Bushbuck adapter has been discontinued, but we are able to offer you a custom option if your Bushbuck does not have a threaded barrel.
You will need to supply us with three precise measurements, one at the muzzle, one 15mm from the muzzle and one 30mm from the muzzle. For best fitment these measurements must be taken carefully with quality instruments. There are no refunds or exchanges for custom work.
Your custom adapter will be made of 6061 aluminum and have four, steel set screws to hold it in place. Custom adapters are not anodized.
I would recommend the .45/50 Emperor v3 along with the 6.5 inch extender to tame this beast!
Crosman 2240 Adapter A30
$36.00
$40.00
This is a slide on adapter for the Crosman 2240. The ID measures 7/16 and it has 1/2x20 UNF threads to attach your favorite moderator with a knurled thread protector.
Daystate Delta Wolf M20x1 to 1/2 x 20 Adapter A96
$40.00
This adapter converts the factory shroud threads from M20x1 to 1/2 x 20.
Features:
Aluminum 6061 T6
Black anodize
Comes with knurled thread protector
Daystate Huntsman Regal 1/2 x 20 Adapter A17
$36.00
$40.00
You'll need this 1/2 x 20 adapter if you can't get the OEM adapter off the airstream that came with the gun.
Features:
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Black anodize
Diamond pattern knurling for easy grip
Dead Lead Eviscerator Slugs | .30 Cal | 70 gr M143
$25.00
Dead Lead .30 Cal Eviscerator Slugs are meticulously hand-pressed for unparalleled accuracy and devastating terminal performance, making them the ideal choice for precision varmint hunting.
Key Features:
Caliber & Weight: .30 caliber, 70 grains
Design: Eviscerator Slugs, optimized for terminal impact and expansion
Hand-Pressed Quality: Ensures consistent weight and superior accuracy
Tight Tolerances: All slugs are within a tenth of a grain of advertised weight
Quantity: 100 count
Specifications:
Head Diameter: 7.62mm
Overall Length: .50"
Ballistic Coefficient (BC): .140
Recommended FPS: 880 to 910+
Why Choose Dead Lead Slugs?
Unmatched Precision: Hand-pressed for superior accuracy and consistency
Devastating Terminal Performance: Eviscerator design maximizes impact and expansion
Ideal for Varmint Hunting: Perfect for ethical and efficient pest control
High-Quality Construction: Built to exacting standards for reliable performance
Experience the Difference: Upgrade your varmint hunting arsenal with Dead Lead .30 Cal Eviscerator Slugs. Order now at DonnyFL and experience the power of precision!
Delrin Bushing for TRS Clamp ST0040
$4.50
$5.00
This bushing goes inside the TRS clamp allowing you to better stabilize the FX carbon fiber sleeve. This does not include the clamp.
Features:
Made of black delrin.
Diana Outlaw 1/2 x 20 Adapter A44
$40.50
$45.00
Features:
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Matte black anodize
Diamond pattern knurling for easy grip
Compatible with .177, .22 and .25 calibers
Remove factory suppressor and screw this into the shroud directly onto the barrel.
DonnyFL Adapter for AEA Challenger / AEA HP MAX A91
$36.00
$40.00
This adapter is compatible with the .357/.45/.50 big bore SIDE LEVER AEA Challenger as well as the .357/.45/.50 AEA HP SS Max.
Key Features:
Thread Compatibility: M18x1 male threads.
Durable Construction: Made from 6061 T6 aluminum for strength and durability.
Anodized Finish: Provides a sleek and protective coating.
Knurled Thread Protector: Ensures secure and easy handling.
Important Information:
Intended Use: The products on DonnyFL are intended for use on airguns only. It is a violation of federal law to use this product in a manner inconsistent with its intended purpose.
Upgrade your AEA Challenger or AEA HP MAX with the DonnyFL Adapter and enjoy enhanced compatibility and performance. Order now and customize your airgun setup to fit your needs!
DonnyFL Challenge Coin
$3.75
$5.00
A perfect collector's item or gift.
Roughly the size of a quarter, 1 inch diameter weighing in at 0.4 oz.
