Products

4.3 oz, 60% Polyester 40% Cotton Tear-away, removable labels Made to fit comfortably all day long available up to 3XL

Taipan Mutant Shroud Adapter 1/2 x 20 A18 $50.00

This adapter will screw into the Mutant OEM shroud. Has 1/2 x 20 UNF male threads that allows you to screw on any 1/2 x 20 female threaded LDCs. Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Cap with diamond pattern knurling for easy grip

Taipan Mutant Speed Dialer M11 $50.00

Look ma no more tools! You no longer need the prongs or hex key whenever you want to adjust your spring tension. Loosen the side thumb screw allowing you to adjust the HST in or out with ease. Once you're done, tighten back the side screw. Features: CNC parts Red anodize to add character to your gun Package includes side thumb screw and HST adjuster

Taipan Veteran Shroud Adapter 1/2 x 20 A15 $50.00

This adapter will screw into the Mutant OEM shroud. Has 1/2 x 20 UNF male threads that allows you to screw on any 1/2 x 20 female threaded LDCs. Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Cap with diamond pattern knurling for easy grip

Taipan Veteran Speed Dialer M12 $50.00

Look ma no tools! You don't need the prongs or hex key whenever you want to adjust your spring tension. Loosen the side thumb screw to adjust the HST in or out with ease. Once you're done, tighten back the side screw. Features: CNC parts Has a through hole in the back in case the spring tension is too much, you can use a hex key or thin screw driver to help turn Black anodize to add character to your gun Package includes side thumb screw and HST adjuster

Sold out

Tank Valve Adapter M18x1.5 ST0037 $30.00

This adapter allows you to convert the threads on our tank valve from 7/8-14 to M18x1.5. The M18x1.5 is common on carbon fiber gun tanks. Features: 7075 Aluminum Black Anodize Female 7/8-14 threads Male M18x1.5 threads

Sold out

Tank Valve ST0031 $200.00

Replace your factory tank valve with our larger valve. The large knobs and handle make filling and releasing air a breeze! Features: Open and close tank with a 2.25 inch knob Drain the line with the 1.25 inch knob Dead head to test the tank's pressure 2.2 inch gauge display Tank thread 7/8-14 UNF Pair with ST0037 adapter to be able to screw on carbon fiber gun bottles.

TRS Rail Shroud Clamp ST0041 $10.00

Use this delrin clamp to prevent your factory shroud from drooping. It attaches to the side rail MLok slots. Note* will not work on carbon fiber shrouds. If you have the carbon fiber tension kit from FX, you'll also need the bushing to go inside the TRS clamp ST0040 Features: Made of black delrin Two screws and two washer

Umarex Gauntlet 1/2 x 20 Adapter A23 $40.00

This adapter screws into the OEM shroud. Replaces the original front cap. Features: Comes with knurled cap CNC Matte black anodize Other things to consider: Gauntlet Aluminum Air Stripper **NOT COMPATIBLE WITH THE .30 CAL GAUNTLET 2

Umarex Gauntlet Aluminum Air Stripper M5 $12.00

This piece replaces the OEM plastic air stripper. This will help in the long run as the plastic ones tend to crack. It includes o-ring. Features: 6061 Aluminum Matte black anodize Other things to consider: Gauntlet 1/2 x 20 adapter Gauntlet short shroud with 1/2 x 20 adapter **NOT COMPATIBLE WITH THE .30 CAL GAUNTLET 2

Umarex Gauntlet Short Shroud Combo Deal from $160.00

Upgrade your Gauntlet to this combo deal. In this package you'll get the following: Gauntlet short shroud with 1/2 x 20 adapter $60 Gauntlet aluminum air stripper $12 All for $30 in addition to the suppressor of you choice This kit works with the .22 caliber Gauntlet as well. *International Customers, please be aware that if you add this to your cart, there will not be an option to ship your items. If you have other items that are non-restricted, they won't show up either until you remove the restricted item from your cart. Directions:1. Remove the factory shroud by turning the shroud counter clockwise2. You won't need the factory black baffle but hang on to the spring3. Remove factory air stripper by pulling it off4. Put the o'ring onto the DonnYFL air stripper5. Slide the air stripper onto the barrel6. Take the short shroud and drop the factory spring down the shroud towards the side that has the adapter7. Apply some silicone grease onto the air stripper o'ring8. Slide short shroud over the barrel, once you get to the threaded part in the rear, turn clockwise to tighten the shroud.To install a suppressor, remove the thread protector from the shroud. Screw on the suppressor Very important that you include the factory spring, it holds the air stripper in place. Without it, the stripper will fall off and block the ext hole. **NOT COMPATIBLE WITH THE .30 CAL GAUNTLET 2 / GAUNTLET 2 SL CAL .22, .25, .30

Umarex Gauntlet Short Shroud with 1/2 x 20 Adapter $60.00

This shroud is 3 inches shorter than OEM. I removed the plastic baffle that came with the gun and added a 1/2 x 20 adapter. This allows you to put a bigger suppressor in the front and make this gun super quiet. I highly recommend the Tatsu. All you will hear is the hammer spring. Overall length is 23 inches. You will need the OEM spring. Features: 23 inches overall CNC Matte black anodize Other things to consider: Gauntlet Aluminum Air Stripper Directions:1. Remove the factory shroud by turning the shroud counter clockwise2. You won't need the factory black baffle but hang on to the spring3. Remove factory air stripper by pulling it off4. Put the o'ring onto the DonnyFL air stripper5. Slide the air stripper onto the barrel6. Take the short shroud and drop the factory spring down the shroud towards the side that has the adapter7. Apply some silicone grease onto the air stripper o'ring8. Slide short shroud over the barrel, once you're at threaded part in the rear, turn clockwise to tighten.To install a suppressor, remove the thread protector from the shroud. Screw on the suppressor. Very important that you include the factory spring, it holds the air stripper in place. Without it, the stripper will fall off and block the exit hole. *Return Policy **NOT COMPATIBLE WITH THE .30 CAL GAUNTLET 2

Universal Bottle Clamp 50mm ST0071 $59.99

If you're uneasy about drilling into your factory gun stock, this 50mm bottle clamp will easily attach to your 50mm carbon fiber or aluminum bottles. It has rubber pads on the inside to prevent any marring to your bottle. This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories. Great fit for the Umarex Gauntlet 30. Features: 6061 T6 aluminum Matte black anodize

Universal Picatinny to Arca Large Version ST0025 $165.00

Easily clamp this Arca Swiss rail to an existing picatinny rail to extend the bipod rail. It has T slots on both sides allowing you to attach T slot/M Lok accessories. Features: 6061 T6 aluminum black anodize 4mm hex key required to loosen and tighten clamp 1/4 - 20 threads to connect common camera tripod adapters 2.25 inches wide x 7 inches long 7.7 oz

Universal Picatinny to Arca Short ST0024 $30.00

Use this adapter to convert a picatinny rail to Arca. Useful if you already have a tripod that is setup for Arca. Features: 6061 T6 Aluminum with stainless steel screws Use 4mm hex key

Universal Picatinny To Picatinny Rail ST0032 $80.00

This rail is great for guns that have a short picatinny by the trigger guard. Very solid and allows for more rail. Features 2 inch arca 4.5 inch of picatinny 1/4-20 threaded hole for camera tripod adapters 6061 T6 Aluminum Black anodized Weight = 5.3oz

Uragan King 1/2 x 20 Adapter A79 $40.00

Features: 6061 Aluminum 1/2 x 20 male threads Black Anodized Thread Protector compatible up to 30 caliber Will not work if your baffle looks like the one in the picture below.

UTG ACCU-SYNC 2018R DOT SIGHT, RED 3.0 MOA SINGLE DOT, FOR MINI ACOG FOOTPRINT M141 $179.00

UTG® ACCU-SYNC® dot sights come in a compact and subcompact size and feature a red illuminated 3 MOA dot with 8 manually adjusted brightness intensity settings to choose from. Illumination memory conveniently gets users right back to the last brightness setting used upon activation. Fully sealed, ACCU-SYNC® dot sights are IPX7 waterproof rated and constructed from matte black anodized 6061-T6 aluminum. Optimized for low power consumption and powered by a single CR2032 battery, a 30,000+ hour battery life (at middle brightness) comes standard. The mounting base uses the common mini ACOG® footprint and is configured for a lower 1/3 co-witness out of the box. Removing the included riser drops the height down to that of a low mount providing users two commonly used height profiles for different firearm applications. In addition, the base features squared recoil stops and our QR (quick release) mount, making for a quick installation and removal, reliable return to zero, and is compatible with Picatinny rails with widths that may even be out of spec. Tool-free tension adjustment is locked in place via a gear and spring-loaded locking lever interface, allowing users to set it once and forget it.

UTG Bug Buster 3-9x32 AO, Mil-Dot IR, 1/4 MOA, 1" Tube. M138 $139.00

Expertly crafted for precision, the UTG Bug Buster Rifle Scope combines 3-9x magnification, a 32mm adjustable objective lens, and a Mil-dot reticle for clear and accurate long-range shots. With True Strength construction and EZ-TAP Illumination technology, this scope is durable and reliable in any environment, providing enhanced visibility and versatility for any shooting situation. Rifle Scope: Key Features- Magnification: 3-9x for versatile zooming.- Objective Lens: 32mm, adjustable for precision focus.- Tube Size: 1", standard compatibility.- Adjustment: 1/4 MOA (1/4" at 100 yards).- Reticle:** Mil-dot for accurate sighting.- Parallax Adjustment: 3 yards to infinity.- Field of View: 37.7' to 14' at 100 yards.- Eye Relief: 4.2" to 3.2" for comfort.- Exit Pupil: 10.6mm to 3.6mm.- Weight & Length: 13.9 oz., 8.50" long.- Accessories: Includes battery, sunshade, lens caps, and mounting rings.Advanced Optics:- Emerald-Coated: For 95% light transmission.- Nitrogen Filled: Fogproof, shockproof, rainproof.- EZ-TAP IE Technology: RGB and 36-color mode.- Memory System: Retains color/brightness settings.- Zero Lock Turrets: Easy adjustments.Finish:- Matte Black:** Sleek and glare-reducing.Ideal for various lighting conditions, this scope offers an illuminated reticle in multiple colors, enhancing visibility and precision in every environment.

UTG Dovetail to Picatinny / Weaver Low Snap-in Accessory M142 $13.99

These are snap-in adapters to go from Dovetail to Picatinny. They are low-profile, lightweight and very easy to install. -Top slot with spring tension retraction / Expansion design to snap into picatinny/weaver base. -Precision and repeatable alignment. -Removable stop pin for extra secure installation

Find anything you need