Products

FX Shroud Extender 1/2 x 20 Female to 1/2 x 20 Male ST0038 $31.50 $35.00

This adapter adds .75 inches to the FX shroud. Female 1/2 x 20 to Male 1/2 x 20 Features: 6061 T6 aluminum length .75 inches Includes thread protector Black anodize Weights: 1.5oz 28MM outer diameter

FX Shroud Thread Protector $10.00

This knurled thread protector will fit FX Impact, FX Crown and Wildcat 1/2 x 20 shrouds. Features: 6061 T6 Aluminum Matte black anodize Kurled the 1/2x20 thickness is 9.4mm the M18x1 thickness is 12mm

-10% sale

FX Wildcat / FX Royale 400/500 Adapter A12 $45.00 $50.00

These adapters are for Wildcat shrouds that extend past the air tube and has female threads once you remove the front shroud cap. It is also compatible with FX Royale 400/500, Boss and Whisper. This adapter is Male to Male, one side is M20x1 that goes into the shroud and the other end is 1/2 x 20 UNF. Features Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip *Note if you have a newer Wildcat, this is not the correct adapter. You will need this one instead: https://donnyfl.com/collections/adapters/products/fx-impact-wildcat-1-2-x-20-unf-adapter-matte-finish-with-thread-protector

FX Wildcat Mag Holder M27 $25.00

With Matt247365 from Airgun Nation's blessing, I am happy to offer these easy to install Wildcat mag holders. Compatible with .177 .22 .25 and .30 caliber. Your magazine clicks securely into the Mag holder using it’s own ball bearing and can rotate for easy loading with one hand while on the gun. As many as 4 Magholders can fit on the Wildcat at one time. You can mount 1, 2, 3 or 4 in a variety of configurations facing either to the front or to the rear and on either side or on both sides. Features: Made of 6061 T6 aluminum black anodize CNC machined Uses 2.5 mm Hex key

FX Wildcat MKIII BT Compact, Synthetic $1,849.99

Iconic Airgun, Evolved: The FX Wildcat MKIII BT Compact, Synthetic takes the legendary bullpup design to new heights, offering enhanced power and air capacity to handle slugs and heavier pellets with ease. Experience the ultimate in off-hand hunting performance. Key Features: Massive Power Plenum: 89cc Power Plenum for increased muzzle energy and extended range. Dual FX AMP Regulators: Precise air control for unmatched accuracy and consistency. FX Smooth Twist X Barrel System: World-class barrel for competition-grade accuracy. Complete Adjustability: Externally adjustable regulators and rear power adjuster for fine-tuning. Compact & Lightweight: 300cc carbon fiber bottle and 500mm barrel for easy handling. Versatile Calibers: Available in .22, .25, and .30 calibers. Interchangeable Barrels: Easily swap barrel kits for different calibers (sold separately). Upgrade Potential: Compatible with the FX Wildcat Slug Power Kit for even more power. Specifications: Caliber: .22, .25, .30 Barrel Length: 500mm Fill Pressure: 300 BAR Shot Capacity: Varies by caliber, up to 85 shots per fill Stock: Synthetic Weight: 6 lbs Dimensions: 7 × 30 × 10 in Why Choose DonnyFL? Expert Support: Our team is passionate about airguns and is ready to help you find the perfect fit. Top-Rated Customer Service: We're committed to your satisfaction. Unleash the Wildcat: The FX Wildcat MKIII BT Compact, Synthetic is the perfect blend of power, precision, and versatility. Order now at DonnyFL and experience the next generation of airgun hunting!

-10% sale

FX Wildcat Shroud Extension 1/2 x 20 Adapter A1 $45.00 $50.00

This shroud extension is for shrouds that sits behind the lower air tube. Female side is M20x1 and male 1/2 x 20. Features Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize 44mm long

FX/DonnyFL Endcaps $35.00

Spare endcaps for the FX/DonnyFL suppressors.

Sold out -10% sale

Hatsan Blitz 1/2 x 20 Adapter A84 D/C $36.00 $40.00

This adapter allows you to screw on an airgun suppressor with 1/2 x 20 threads. *******Have Been Discontinued. Refer to A117.******* I recommend going with the Ronin 1/2 x 20 with this gun. I have it installed on my personal gun and it works flawlessly. However, results may vary and might need modification to work in semi auto mode. This gun is similar to the Bullmaster and others have been able to fix the issue by replacing the spring. Go to your hardware store and look for a lighter spring. I got mine from Ace hardware and it fixed the magazine indexing issue. Features: Compatible up to .30 caliber Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

Sold out -10% sale

Hatsan Blitz Double Tank Adapter ST0033 $135.00 $150.00

The Hatsan Blitz is a fun gun, shooting semi and full auto! You can imagine how much pellets and air you go through in one session. We can help the fun last a little longer with this double tank adapter. Note* Please be aware that you'll need two air bottles that have built in valves to work with this adapter. FX or Daystate bottles will work. Features: 6061 T6 Aluminum Black Anodize Stainless steel tank thread nipples

-10% sale

Hatsan Blitz M18X1 Adapter A117 $36.00 $40.00

This adapter allows you to screw on an airgun suppressor with M18x1 threads. ***New Improved For More Air Flow.*** I recommend going with the Ronin with this gun. I have it installed on my personal gun and it works flawlessly. However, results may vary and might need modification to work in semi auto mode. This gun is similar to the Bullmaster and others have been able to fix the issue by replacing the spring. Go to your hardware store and look for a lighter spring. I got mine from Ace hardware and it fixed the magazine indexing issue. Features: Compatible up to .30 caliber Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip Important information: The only Moderator that is recommended with the Blitz is the RONIN .25/.30 M18, #S20A CLICK HERE

-10% sale

Hatsan Bullmaster/Galatian 1/2 x 20 Adapter A35 $36.00 $40.00

1/2 x 20 UNF adapter for those rapid firing Bullmaster. New and improve design to allow more air flow. Please note that when you add a suppressor to this gun, it does not properly index the magazine. It uses blowback air to advance the magazine however with a suppressor on, it over rotates and causes it to not properly index. If you plan to single load it'll work fine. Some customers have been able to get the gun to work properly by swapping out the spring inside the shroud with a different strength one. Will take trial an error. Similar to the Blitz, this guy may need a lighter spring to work with a suppressor. I got mine from Ace hardware. See picture Features: Compatible up to .30 caliber Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

-10% sale

Hatsan Jet 1 & Jet 2 Adapter A111 $36.00 $40.00

The DonnyFL Hatsan Jet 1 & Jet 2 Adapter A111 is specifically built to enhance the performance and compatibility of your Hatsan Jet 1 and Hatsan Jet 2 airguns. This high-quality adapter ensures a secure and efficient connection, making it an essential accessory for your airgun setup. Key Features: Double-Sided Male Adapter: Specifically designed for Hatsan Jet 1 and Hatsan Jet 2 airguns. Easy Installation: Features through holes in the threads for easy tightening or loosening. High-Quality Construction: Matte black anodized threads ensure durability and a sleek appearance. Precise Dimensions: Outer diameter of .655 inches (16.6 mm). Important Information: Use with a Moderator: It is recommended to use this adapter with a moderator that is one caliber higher than your gun. Intended Use: The products on DonnyFL are intended for use on airguns only. Using this product in a manner inconsistent with its intended purpose violates federal law. International Customers: Adding this item to your cart may restrict shipping options. Non-restricted items will not show up until the restricted item is removed. Return Policy: Please review our return policy for more details. Why Choose DonnyFL? DonnyFL is renowned for manufacturing high-quality airgun accessories and upgrades. The Hatsan Jet 1 & Jet 2 Adapter A111 is designed to provide superior compatibility, durability, and ease of use, making it a must-have for serious airgun enthusiasts. Perfect for Airgun Enthusiasts: Upgrade your Hatsan Jet 1 or Hatsan Jet 2 with the DonnyFL Hatsan Jet 1 & Jet 2 Adapter A111 for enhanced performance and versatility. Order now and take your shooting experience to the next level. Perfect for airgun enthusiasts who demand the best in aftermarket accessories. Order your DonnyFL Hatsan Jet 1 & Jet 2 Adapter A111 today and elevate your shooting experience!

-10% sale

Hatsan Pile Driver Adapter $40.50 $45.00

Features: Compatible with .45 and .50 caliber Made of steel M18x1 threads compatible with Emperor with M18x1 endcap Comes with black anodized Aluminum thread protector Adapters are tight fit and has four set screws (M4) to help secure it onto the barrel Uses 2mm hex keys for set screws NOTE: We've seen some variance in the OD of barrels recently, please DO NOT ORDER ONLINE. Instead email us with a note of your barrel's EXACT OD so it can be custom made to fit your barrel.

-10% sale

Hatsan QE 1/2 x 20 Adapter A24 $40.50 $45.00

If you have a Hatsan Bully .25/.30- based on customer's feedback, I would go with the Emperor. *We have not had any success with customers using a suppressor on Hatsan's line up of semi auto guns. It causes the gun to not index properly. Features: Matte black Anodized CNC Includes knurled thread protector Compatible up to .30 Compatible with the following guns: Hatsan GladiusHatsan Flash Wood QEHatsan AirMaxHatsan Bullboss QEHatsan BT65 QEHatsan Nova QEHatsan AT44-10 QEHatsan Hercules QEHatsan Flashpup QEHatsan AT P1Hatsan Flash QE

-10% sale

Hatsan QE Big Bore .357/.457 M18x1 Adapter A54 $40.50 $45.00

Features: Matte black Anodized CNC Includes knurled thread protector Compatible for the .357 and .457 model The new Factor BP in .357 cal has M14x1.25 threads on the QE system, so for that air rifle you need a moderator with an M14x1.25 endcap, not an adapter.

-10% sale

Hatsan Riptor 1/2 x 20 Adapter A14 $36.00 $40.00

Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Grey anodize Diamond pattern knurling for easy grip Compatible with .22 and .25 calibers

-10% sale

Hatsan Sortie 1/2 x 20 Adapter A51 $36.00 $40.00

Features: *Warning, suppressors do not work well on Hatsan's line up of semi-auto guns. It will disrupt the magazine index and will not index properly. Use this adapter only if you plan to single load. Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

Sold out

Huben GK1 Air Pistol $1,250.00

High Velocity & Muzzle Energy: Achieves 836 fps and 4.5-40 ft-lb muzzle energy for versatile shooting applications. Robust Build: Walnut grip and sturdy construction ensure durability and comfort. Adjustable Sights: Front sight (elevation) and rear sight (windage) for enhanced accuracy. High-Capacity Magazine: Auto-rotating, non-removable magazine with a capacity of 19 shots (.22 cal) or 17 shots (.25 cal). Optics Ready: 11mm dovetail rail for easy mounting of optics. Includes: User manual, fill probe, spare parts, and a hard carrying case. Specifications: Barrel Length: 8.2 inches (210mm) Caliber Options: .22, .25 Max Fill Pressure: 5000 psi (350 Bar) Cylinder Volume: 85cc Weight: 2.65 lb Dimensions: 12.8 x 6.3 x 2 inches

-10% sale

Huben GK1 Pistol Adapter A116 $31.50 $35.00

This adapter allows you to add a 1/2 x 20 moderator or muzzle brake to your fun little pistol. Features: 6061 T6 Aluminum Black Anodize Knurled thread protector

-10% sale

Huben K1 1/2 x 20 Adapter A9 $36.00 $40.00

Does not work on first gen Hubens Features Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

Find anything you need