$50-$70 Custom Adapters
$50-$70 Custom Adapters $2,000.00
For custom adapters, please contact us in-house through email. We have an incredible machinist with years of experience, he's one of us in the airgun community.  PRICE FOR CUSTOM ADAPTERS ARE $50-$70 The price varies depending on the size and quantity of material.  MAKE SURE TO DOUBLE CHECK YOUR MEASUREMENTS!!!  Once the measurements are received by us and we make the product, as it leaves our possession the job is done. We do not offer warrantee on custom adapters so in the case that you receive your adapter and it doesn't fit due to a miscalculation on the customers end, it does not warrant a retry.   CUSTOM ADAPTERS WILL NOT BE ANODIZED!! IT WILL BE SENT AS BARE ALUMINUM!! Email: Izzy@donnyfl.com with specifications.    
.357/.45/.50 AEA Challenger / .357/.45/.50 AEA HP MAX A91
.357/.45/.50 AEA Challenger... $40.00
This adapter is compatible with the .357/.45/50 big bore SIDE LEVER AEA Challenger as well as the .357/.45/.50 AEA HP SS Max.  Features: M18x1 male threads 6061 T6 Aluminum Anodized Knurled thread protector
1/2 x 20 Double Male Adapter / Air Arms S510 / Hatsan Jet 1 & Jet 2 Adapter A21
1/2 x 20 Double Male Adapte... $40.00
Features: Any gun that needs a double sided male adapter One side has knurled cap Has through hole in the threads for easy tightening or loosening CNC Matte Black Anodize .79 inches / 20 mm OD Great for AirArms 
10mm, 11mm, 12mm, 14mm, 15mm and 16mm Slide On Adapter with 1/2 x 20 UNF
10mm, 11mm, 12mm, 14mm, 15m... $45.00
Have an airgun that does not have a shroud and would like to be able to add an airgun moderator? These slide on adapters work on airguns with barrel sizes 10mm, 11mm, 12mm, 14mm, 15mm and 16mm. Features:  Compatible with .177 to .25 Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip Comes with M4 set screws Uses 2mm Allen keys
AEA Challenger .30 and .357 Bolt Action Adapter
AEA Challenger .30 and .357... $40.00
Please note if your gun is the side lever version, you'll need this adapter instead https://donnyfl.com/products/45-50-aea-challenger-345-aea-hp-ss-max?_pos=1&_sid=a77757bc5&_ss=r Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Comes with knurled thread protector For .30 caliber measure the OD of the threaded part of the front cap. It should be close to 28mm. May need to heat up the front cap with a heat gun or mini torch to loosen the thread locker.
AEA Challenger Pro Adapter 1/2 x 20 A99
AEA Challenger Pro Adapter ... $40.00
This adapter converts the factory barrel threads from M14x1 to 1/2 x 20. It is also designed to center the barrel within the shroud. Features: 6061 T6 Aluminum Comes with knurled thread protector Compatible up to .30 caliber
AEA Element v1 1/2 x 20 Adapter A85
AEA Element v1 1/2 x 20 Ada... $40.00
Note:* This is for the AEA Element that does not have a power wheel. If your gun has a power wheel, get this adapter instead A93 This adapter fits factory carbon fiber shroud allowing you to screw on an airgun suppressor with 1/2 x 20 threads. Features: 6061 Aluminum T6 Black Anodized Knurled thread protector  
AEA Element v2 1/2 x 20 A93
AEA Element v2 1/2 x 20 A93 $40.00
*Note: Will only fit on the newer Element with the power wheel. If your gun does not have the power wheel, get this adapter instead- A85 This adapter fits factory carbon fiber shroud allowing you to screw on an airgun suppressor with 1/2 x 20 threads. Features: 6061 Aluminum T6 Black Anodized Knurled thread protector
AEA HP 1/2 x 20 Adapter A77
AEA HP 1/2 x 20 Adapter A77 $40.00
Works on AEA HP models up to .30 caliber. Includes: HP SS, HP SS Plus, HP SS max Features: 6061 Aluminum 1/2 x 20 male threads Black Anodized
AEA S45 M18x1 Extender A103
AEA S45 M18x1 Extender A103 $35.00
This adapter is 2 inches long and clears the factory air tube allowing you to put a Great Kami or Emperor with M18x1 threads.  Features: Aluminum 6061 T6 Not anodized
AEA Terminator M18x1 Big Bore Adapter
AEA Terminator M18x1 Big Bo... $40.00
You may need to heat up the front cap to loosen the epoxy. Then unscrew from gun.  
AEA Zeus 2 inch Barrel Extender A97
AEA Zeus 2 inch Barrel Exte... $30.00
This adapter is for Zeus barrels that sits behind the air tube. This extends it two inches allowing you to screw on a suppressor.  Features: Made of harden steel  M23x1 threads  
Air Venturi Avenger Extender/Umarex Origin 1/2 x 20 Adapter A70
Air Venturi Avenger Extende... $45.00
Note: I would highly recommend the FX/DonnyFL suppressor for the Avenger. Does a really good job reducing the muzzle report and you do not need to remove it to fill the gun. The adapter goes over the barrel to help center alignment. This reduces the chance of pellet clipping and improves accuracy. Features: Compatible with .177 caliber to .25 6061 Aluminum T6 Black anodized 1/2 x 20 male threads
Airforce Condor .22-.25 1/2 x 20 Adapter A31
Airforce Condor .22-.25 1/2... $45.00
Made of steel 1/2 x 20 UNF threads compatible with .22 and .25 caliber Comes with black anodized Aluminum thread protector Tight fit and has two set screws (M4) to help secure it onto the barrel Uses 2mm hex keys for set screws
Airforce Condor SS/Talon SS 1/2 x 20 Adapter A55
Airforce Condor SS/Talon SS... $45.00
Add a moderator to this adapter to make the Condor SS super quiet.  Features:  Compatible with .177 to .25 Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip Comes with Oring
Airforce Escape .22-.25 1/2 x 20 Adapter A31
Airforce Escape .22-.25 1/2... $45.00
Please note, this will not fit the Escape Ultra Light version. Contact me for custom adapter. Finally an answer to the Airforce Texan line up. Made of steel 1/2 x 20 UNF threads compatible with .22 and .25 caliber Compatible with other 16mm barrel as well. Comes with black anodized Aluminum thread protector Tight fit and has two set screws (M4) to help secure it onto the barrel Uses 2mm hex keys for set screws
Airforce TalonP 1/2 x 20 Adapter A40
Airforce TalonP 1/2 x 20 Ad... $45.00
Add a moderator to this adapter to make the Talon SS and TalonP super quiet.  Features:  Compatible with .177 to .25 Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip Comes with Oring
Airforce Texan .257 .308 .357 .457 and .50
Airforce Texan .257 .308 .3... $45.00
Note: Please measure your barrels outer diameter before ordering. Compare with the sizes below. There maybe a change in their barrel anodizing which is causing the OD to be a little larger. Features: Made of steel  M18x1 threads compatible with .357 Ronin or Emperor with M18x1 endcap Comes with black anodized Aluminum thread protector Adapters are tight fit and have two set screws (M4) to help secure to the barrel Very tight fit, may require some sanding inside the adapter Uses 2mm hex keys for set screws I would recommend putting a thin film of blue loctite on the barrel then slide on the adapter. Let it set overnight. The following are the inner diameter for my adapters: .257 = Use Condor adapter here .308/357 = 16mm or .625 inches "A34" .308/.357 = 17mm or .67inches "A95" .457 = .707 to .71 inches Two sizes for .50 (please use a caliper and measure your barrel's outer diameter) .50 =  18.83 mm .50 = 19.1 mm  
Airforce Texan LSS Adapter A65
Airforce Texan LSS Adapter A65 $40.00
This adapter screws directly to the end of the factory Texan LSS shroud. It has M18x1 male threads to pair with my big bore suppressors. Add an Emperor or Ronin to tame the beast!  Features: 6061 Aluminum Matte black anodize knurled thread protector
AirMak Caiman 1/2 x 20 Adapter A75
AirMak Caiman 1/2 x 20 Adap... $45.00
Features: Compatible with .177, .22 and .25 6061 Aluminum T6 Black anodized Knurled cap 1/2 x 20 male threads