accessories

This piece replaces the OEM plastic air stripper. This will help in the long run as the plastic ones tend to crack. It includes o-ring. Features: 6061 Aluminum Matte black anodize Other things to consider: Gauntlet 1/2 x 20 adapter Gauntlet short shroud with 1/2 x 20 adapter **NOT COMPATIBLE WITH THE .30 CAL GAUNTLET 2

Upgrade your Gauntlet to this combo deal. In this package you'll get the following: Gauntlet short shroud with 1/2 x 20 adapter $60 Gauntlet aluminum air stripper $12 All for $30 in addition to the suppressor of you choice This kit works with the .22 caliber Gauntlet as well. *International Customers, please be aware that if you add this to your cart, there will not be an option to ship your items. If you have other items that are non-restricted, they won't show up either until you remove the restricted item from your cart. Directions:1. Remove the factory shroud by turning the shroud counter clockwise2. You won't need the factory black baffle but hang on to the spring3. Remove factory air stripper by pulling it off4. Put the o'ring onto the DonnYFL air stripper5. Slide the air stripper onto the barrel6. Take the short shroud and drop the factory spring down the shroud towards the side that has the adapter7. Apply some silicone grease onto the air stripper o'ring8. Slide short shroud over the barrel, once you get to the threaded part in the rear, turn clockwise to tighten the shroud.To install a suppressor, remove the thread protector from the shroud. Screw on the suppressor ​ Very important that you include the factory spring, it holds the air stripper in place. Without it, the stripper will fall off and block the ext hole. **NOT COMPATIBLE WITH THE .30 CAL GAUNTLET 2

This shroud is 3 inches shorter than OEM. I removed the plastic baffle that came with the gun and added a 1/2 x 20 adapter. This allows you to put a bigger suppressor in the front and make this gun super quiet. I highly recommend the Tatsu. All you will hear is the hammer spring. Overall length is 23 inches. You will need the OEM spring.  Features: 23 inches overall CNC Matte black anodize Other things to consider: Gauntlet Aluminum Air Stripper Directions:1. Remove the factory shroud by turning the shroud counter clockwise2. You won't need the factory black baffle but hang on to the spring3. Remove factory air stripper by pulling it off4. Put the o'ring onto the DonnyFL air stripper5. Slide the air stripper onto the barrel6. Take the short shroud and drop the factory spring down the shroud towards the side that has the adapter7. Apply some silicone grease onto the air stripper o'ring8. Slide short shroud over the barrel, once you're at threaded part in the rear, turn clockwise to tighten.To install a suppressor, remove the thread protector from the shroud. Screw on the suppressor. ​Very important that you include the factory spring, it holds the air stripper in place. Without it, the stripper will fall off and block the exit hole. *Return Policy    **NOT COMPATIBLE WITH THE .30 CAL GAUNTLET 2

Customize the size of your Yokozuna or replace sections of your unit with these individual parts. Please note I would not add more than 2 extra baffles on top of the factory units. If you plan to do so, I would recommend going one caliber size up. *The products on DonnyFL are INTENDED for use on airguns only.  It is a violation of Federal law to use this product in a manner inconsistent with what it was intended for.for.

Customize the size of your Yokozuna or replace sections of your unit with these individual parts. Please note I would not add more than 2 extra baffles on top of the factory units. If you plan to do so, I would recommend going one caliber size up. *The products on DonnyFL are INTENDED for use on airguns only.  It is a violation of Federal law to use this product in a manner inconsistent with what it was intended for.for.